Creative Corner


Up-cycling is a wonderful way to revamp or refresh items that you no longer love or are out of date.

You may have items stashed away in your loft or you may want to decorate your house, but simply don't have the spare cash to splash out.

If you don't have anything laying around, charity shops or reclamation yards are a great source for finding items.
The general rule I adopt when searching is, firstly do I like the design or shape and secondly, would I have the expertise to turn it into a piece that I would be happy to have in my home.

I was recently looking for a vase for some silk flowers I had.  To disguise the fact they weren't real, I couldn't have a clear glass one, as the single stem would give my secret away.  I needed a solid colour one, but was not prepared to pay upwards of £30 for one that I would make do with and not one that bowled me over.

I am a huge fan of pearlised stones. so when I saw some in the garden centre, I knew immediately that they would be perfect for the old blue vase I had picked up.

I loved the shape but it looked cheap and uninspiring but at £3.50, I couldn't resist it. This makeover is great as all I needed was some paint, glue and the pebbles.

So with a couple of coats of white paint and some pebbles, a stunning vase was created.

 If you want to up-cyles a vase, make sure you use suitable paint for what you will using the vase for.  Mine was just for silk flowers so it only needed to be wipe clean.

We were lucky enough to be gifted this chair that had been in the family for years and was a childhood memory for hubby. 

This ticked both of my questions as I absolutely loved the shape and as a sewer, I knew it was within my capabilities. I gave it several coats of paint and a wax to protect it, then I removed the old covers and made a template from the pads. Hubby chose the fabric and "voila"...... the chair now takes pride of place in the snug.

There is something about these old bedside tables, that made it impossible for me to get rid of them.
  They are very solid and I love how much room there is in the drawers.

With a thorough sanding down, several coats of paint, a wax and some crystal knobs, I now have two beautiful cabinets that fit in perfectly

We all have them don't we ? - those mahogany effect nest of tables.  
They are so useful, but as we have recently decorated, they simply didn't fit in.

The chair was a purchase online and took me back to my childhood at my nans house

I sanded everything down and glued small mosaic tiles on the top of the tables.  You can pick these up at DIY stores and they come on a square mesh so you can cut them to the size you need.  Once the glue was dry, I grouted the top - I did these with black to go with the colour of the tiles.  Be warned, this is a messy job, but with time and patience, it gives a great effect and is really hard wearing. I then gave the tables several coats of paint and a wax to protect them.  I also stuck felt pads to the bottom of the legs so they didn't scratch the wooden flooring

The chair was very easy to do, a quick fine sanding and two coats of spray paint. 
 Please read the instructions when using spray paint 
as it needs to be done in a well-ventilated space.
 I then re-upholstered the chair seat and made a matching cushion.

I picked up these amazing chairs in a recycled goods centre.  I immediately fell in love with the shape and knew that although I had never tackled something this complex before, I would make sure that I would learn how to. 

All the chair itself needed was a really good clean and polish.  
I carefully unpicked all the cushions and used the fabric as a template. A real bonus was that I was able to re-use all the zips. I bought some on trend check fabric and although this was a challenge and took a fair amount of time, it was well worth the effort and I now have a set of two beautiful armchairs at a fraction of the cost of purchasing them already revamped

These are just a few of the many projects that have been completed here. 
 I hope they have inspired you to have a go and create some gorgeous items to personalised your home. 

Have fun and we would love to see your projects, so make sure you tag us 

The Crafty Co

Up Cycled Books

It's hard to believe, but half term is fast approaching.  These super cute book animals would make a fab project for a cold or rainy afternoon, and you will end up with a really useful note or pen holder that will be admired by all

These are not suitable for small children, due to small parts
If you fancy having a go at making one, below is a step-by step picture tutorial

For the basic animal you will need

old books (roughly 300 pages)
a ruler
pom poms
felt or you could use card

Not essential, but if you would like to add a base,  you will also need

Cardboard or heavy weight card
elastic bands

And if you would like to make the pen holder you will also need

Pens (preferably the ones you would like to put in the finished holder)
Coloured card

Right lets get started 


Carefully remove the front and back covers

Stand the book up and measure 2.5cm and mark with a pencil

Starting from the left, remove the unwanted pages carefully 

Cut away the excess part of the spine, making sure that you don't cut into any of the pages, as they will fall away as you start to fold

Lay the book flat, and with the spine at the bottom, fold the top right corner down as indicated above,
and run your finger down the crease

Then, fold the top of the page downwards so that it meets the line across the spine, and run your finger across the fold to make a nice sharp crease

Move the page down and out of the way and do the next one in the same way

And the next, and the next and you've got it.......the next

Once it becomes awkward to fold it, turn the book round so that the spine is to the right

By now you will understand the folding process, but it just makes it a bit easier if you fold into the spine, tucking the edge of the page in

and doing the 2nd fold as normal, but again it's easier to tuck in from this angle

Keep going until you have got a nice compact shape.  The more pages you do, the tighter it will be between the pages, and the firmer they will hold the things you place in them

Once the shape starts to lift up when you place it on a flat surface, it's time to stop

Now you need to carefully remove the pages that you don't need

You will now have something that should look like this

This part is not essential, but personally I think it finishes the project off nicely. Lay your animal down on a piece of cardboard or heavy weight card and draw round the outside of the base shape with a pencil

Cut it out making sure that you cut inside the  pencil line (it is better to have the cardboard base a bit smaller and not show) and cover with a generous amount of glue

Place the animal down on top of it, and press down firmly, taking care not to squash the pages. Turn it over and wrap a couple of elastic bands around it for a few minutes, to make sure the glue sets firm

Remove the bands and you now have the base of your animal finished. Now comes the fun bit where you decide what animal you would like to make

I'm going to make a dog, but you can make anything

To make the ears, fold a piece of felt in half and lightly draw the shape of the ear in pencil.  Cut out the shape cutting through the two pieces at the same time. This will ensure that the two ears will match  

Once you have cut them out, turn one of them over so they will mirror each other

Place them in the book but at this stage don't glue them in - just in case you change your mind.  Using  a strong glue, fix two white buttons to the sloping edge

To make them look like eyes, fix two smaller black buttons in the centre of each of the white ones

Make a pom pom and carefully cut away at one side to make it flat, as it will be easier to attach to the front.  Make sure you don't cut too far down or your pom pom will fall apart

Attach it to the front and secure it with an elastic band, just until it dries.  Make sure that you now glue the ears securely in the desired position.

Once it's set, remove the band and admire your handiwork

To make the pen holder, the instructions are the same as the basic animal but it is best to use a book with much thicker pages.  Picture story books are great and they add a bit of colour to the animal.

This book had 46 pages and is just about the right amount.

This is the back view and as you will see, the spaces between the folded pages are much bigger

Find the middle page and push the two sides flat so that there are the same amount of pages on each side

The next part will be different for everyone as it depends what book you have used, but the general rule is you need to make tubes for the pens to sit in. In the picture below I have made template for my tubes. I found a crayon that was bigger than the barrel of my widest pen, however it wasn't quite fat enough so I wrapped and secured a piece of card around it.  I then measured the depth of the pages and cut lots of pieces of black card in order to make the tubes

The depth of my pages were 8cm, and I cut my tubes 6cm deep by 10cm long. The tubes should be about 2cm shorter than your pages to allow for the width of the tubes pulling the pages apart

Wrap the cardboard around the crayon and secure with glue.  Don't wrap it too tight as you may not be able to slide the tube back off

You will now have a perfectly formed tube

Make lots more and then you can start to join them

Lay some along the page and see how many you will need in your row.  I calculated that I would need 7 in each of my rows.  Secure the tubes in a row along one side. This will be hidden once glued in - you can use clear tape, but masking tape works well too

check to see if the tubes will fit before carrying on

You now need to tape two pages together and the first one you do is the centre one that you found earlier.  Place tape down the centre angled part of one page and down the back of the same page.  Join it together with the next one

This creates a pocket and you can now pop the tubes in and secure with strong glue.  You may need to place pegs to hold in place until the glue sets

Makes two more pockets either side of the centre pocket so there are five in total

You now need to cover up the tape that you put on the edges of the pocket.  To do this, fold a spare page in half and cut a strip that is slightly wider than the tape so that is covers it completely.  Taper one end with a 45 degree angle that will allow for the fold at the nose

Glue the strip to the front and back edges to cover the tape

Now all you need to do is add the eyes and nose and fill it with your favourite pens and pencils

Why stop there with animals - there are all sorts of wonderful things you could make

How about using an old annual of a favourite football team and create a desk tidy

When you remove the cover, if you take extra care, you can use this for the base of your tidy

As the pages are nice and thick in glossy annuals, you won't need to use so many pages and they make a really sturdy holder for the tubes to go in

Complete the first part of the fold as per instructions for basic animal

Then do the same for the other edge of the page folding into down into the centre of the book

Then just fold the top point of the page downwards and crease along the fold.  You don't need to go right into the centre of the spine but make sure you do all the pages roughly the same or it will look uneven.  The double fold makes the page really thick so that's why you don't want to tuck the point right in at the spine

For the ruler holder, I simply covered a cardboard sweet tube with a page that had a picture and stuck the tube firmly in position.  Make sure that you place it somewhere that will not be in the way of any of the pens once they are placed in their tube

Or how about making a rocket to hold your memo's and important notes

These ones are super easy.  Use the basic animal instructions and then just add a base.  I used a mixture of craft foam and cardboard and you can let your imagination go wild.  How about a plane or a train.

Go on ....... have a go

I hope you have as much fun making your book animals as I did and I would love to see your creations

Have fun

Happy Crafting

The Crafty Co

Drying fruit slices using a microwave


Don't you just love this time of year !

Cosy dark nights and a real crispness in the air - and I'm pleased to report that, after years of trying to master the art of drying fruit slices, I have finally cracked it.

I have had numerous failed attempts in a conventional oven, I usually end up leaving them in too long or am impatient by not cooking them on a low enough heat, so this year, after a lot of searching I found these instructions which uses a microwave, and I have got the most amazing professional looking results

I used a nice quality orange, which was really juicy and very fragrant, and even though they have now dried completely, they still smell lovely

I did have a senior moment and cut the first orange the wrong way - the navel of the orange should be facing out to the side and not at the top, but as I love oranges, it wasn't wasted and went down a treat

I cut mine as thin as I could without harming any fingers along the way, but that is just a personal preference and they look just as good slightly thicker

I found that after microwaving, there was still a lot of surplus juice in the slices.  I used a clean piece of kitchen paper and carefully pressed out as much liquid as I could, without damaging the segments and then put them somewhere warm to dry

With the air-drying part of the process, I kept them as flat as possible and turned them every day to try and stop them curling up too much

Due to the fact that they were thin, mine did only take a couple of days to completely dry out, and haven't shrunk much

They are a perfect partner to cinnamon sticks and are a fab way to spruce up holly

I'm now off to buy some lemon and limes to give them a go

Happy Crafting and let me know how you get on

Bauble Bunting

This is a fab little project to add a bit of luxury to your birthday decorations

These baubles are made using die cut shapes. When making any form of bunting, I personally think it gives a more professional look if both sides of the bunting look good. That way you don't have to display it against something solid and it can be hung in the centre of the room for all to see

These ones are made from glitter card and the toppers have been cut using holographic silver card. I glued them and held them together until they dried with pegs.

You can then add any embellishment you like on the front to give them your own personal touch

The ones below are made with foam and I used die cut letters in black card to create a Happy Birthday banner

They would be great personalised for any occasion and you could have a field day decorating them with a Christmas theme

© The Crafty Co | All rights reserved.
Blog Layout Created by pipdig